Technical Rider

On this page you find the technical details of the performance. There is a full-on version and a light version for the lights. Some adjustments can be made. So, do contact us with further questions.

SOUND

4 MONITORS
Aux 1	monitor percussion
Aux 2	monitor tar / setar
Aux 3	sidefill stage right (Jardin)
Aux 4	sidefill stage left (Cour)

INPUT	WHAT	MIC
1	Looper percussion left	D.I.
2	Looper percussion right	D.I.
3	Vocal percussion	SM 58
4	Vocal Tar / Setar	SM 58
5	Vocal Tar / Setar	SM 58
6	Vocal presentation	SM 58
7	Vocal presentation	SM 58
8	Video screen/drum stage right	Km 184 / Neurmann 184 + clip or tape
9	Video screen/drum stage left	Km 184 / Neurmann 184 + clip or tape
10	Video screen/drum	C411 (own)

SOUND MATERIAL
4	micro stands
2	XRL cables (output mixing desk)
4	small reading lamps (3 for the musicians and 1 for the video-artist)

LIGHT - original version

ESSENTIALS
1	Elation OPTI QA Par behind the drum (provided by the company)
4	wash vanuit de hoeken van de dansvloer (in de trussen)
1	1x spot above begin position Maya
4-8	vloerpar met shutter/strobe effect
	'rain down' effect with small beams

Download the Light Plot here.

LIGHT - light version

- 8 ADB pc 1 Kw

- 4 ADB DS profiel 1 KW

- 19 PAR CP 60

- Lee filter: 9 PAR formaat: cyaan 115/116, 8 PC formaat: 201 en 204

- Voldoende bekabeling, dimmers en stroompunten om alles aan te sluiten.

- Chamsys (MQ 50 / 70)

- Indien mogelijk: 4 x moving head wash en 4 x moving head spot (Chauvet of Robe)

- Ladder/hoogtewerker

- POWERCON KABEL + VERLENGKABEL EN STEKKERDOOS VOOR SCHADUWSCENE

Download the Light Plot here.

STAGE

The performance relies on precise light and video effects created by the video artist. Therefore, the venue must be able to achieve complete blackout. The method of achieving this can be discussed and adapted based on the venue’s possibilities.

REQUIREMENTS FOR VIDEO-ARTIST
- small table for placement of camera
- small table for placement of beamer
- Projector (provided by the company) placed right in from and in the middle of the stage

FLOOR REQUIREMENTS FOR THE DANCE
The ideal option is a professional dance floor. However, if this is not available, the floor must meet the following conditions to ensure the safety and comfort of the performers:
* It should be smooth, even, and clean.
* The surface must be free of splinters or rough areas that could cause injuries.
* If the stage consists of separate elements, they must be securely attached to prevent any movement during the performance.
If you have any questions or need further clarification, please don’t hesitate to reach out.

DRUM

ORIGINAL SIZE	DRUM FOR SMALLER PLACES
Diameter: 4m23	Diameter: 3m75

Below is the list of materials needed to build the drum. Apart from the ladder, we can bring everything ourselves. However, as this adds extra weight and luggage, we would prefer if the organiser could provide these materials. If this is not possible, please let us know in advance so we can arrange an alternative solution.

	SUPPLIES FOR DRUM SETTUP
2	allen wrench nr. 8 (inbussleutel)
2	screw spanner nr. 7 (Engelse sleutel)
2	screw spanner nr. 10 (Engelse sleutel)
2	big, flat screw driver (schroevendraaier)
2	rubber hammer (rubberen hamer)
mininum 2	heavy blocks to stabalise the drum
depending on floor	cloths to protect floor
1 or 2	ladder (only for the original size)
4	volunteers for drum setup, especially to
1	metal drill (metaalboor) - good to have in case of problem

BACKSTAGE

TIMING
Drum setup	+- 2 hours
Drum dismantling	+- 45 minutes
Duration Performance	50 minutes
Duration Talk	30 minutes

PARKING
Kindly provide parking for 4 cars.

TIMING (Example)
09u00: Volunteers arrive and start building the drum
10u00: Arrival artists
11u00: Light set up combo show
12u-13u: Lunch for the crew
13u00: soundcheck n0qté
14u00: light + video set-up n0qté
16u30: technical runthrough
17u00: runthrough
18u00: Dinner for the crew
19u15: stage check
20u00: Performance n0qté
21u00: Combo performance
21u20: talk (artists & audience)

BACKSTAGE
Kindly provide a warm and clean backstage for 5 artists, 1 technician and the volunteers.
The backstage needs to be provided with tables, chairs, a mirror, sufficient light and a clean floor to be able to warm up.
Kindly provide water, drinks and snacks for the artists.
Kindly provide an ironing board and an iron if possible.

CONTACT


Production	Maya Sapera	+32 485 938 101	mayasapera.dans@gmail.com
Technical questions	Aaron Benoit	+32 495 71 12 10	Aaron.benoit89@gmail.com

Do contact us with further questions

Contacteer ons